Table of Content

• Metalizer
• How thick can I apply Plasti Dip?
• What is Plasti Dip?
• Is Plasti Dip safe to use on children's toys, animal containment, and/or on kitchen utensils?
• PLASTI DIP®
• Product Videos

However, it is not recommended that it be used on items that may be chewed or inserted into the mouth as it may present a choking hazard. Hold can 6-10” from surface, moving can back and forth slightly overlapping each stroke. Apply heavily enough to produce an even, wet appearance.

Can of Clear Plasti Dip and five specially formulated tints, providing everything you need to create custom colors. For best coverage, use a combined total of at least one bottle of tint. Plasti Dip Glossifier adds a glossy shine and provides Fadebuster™ protection to any Plasti Dip color. With Plasti Dip Glossifier, you can give any Plasti Dipped item a glossy, polished look. We offer products for all projects, big and small. For bulk solutions, visit our professional site, Performix®.

Metalizer

If experiencing runs or sags when spraying, move can further away from the surface and apply a lighter coat. Sagging and dripping can also be caused by high humidity, high temperatures, windy conditions, or direct sunlight. Ideal conditions are low humidity, 70 degrees, little to no air movement in a well-ventilated area. Yes, the Plasti Dip Enhancer in the Glossifier™ formulation provides a glossy finish on cured Plasti Dipped items.

For best results, use a pumice grit. Results may vary with other grit additives. When applied properly Plasti Dip can be removed from most surfaces, if desired. Allow 4 hours cure time, depending on temperatures and humidity. Always use proper ventilation and protection. Avoid any changes in temperature or humidity while coats are drying to avoid blushing.

How thick can I apply Plasti Dip?

Hold can 12-16” from surface, moving can back and forth slightly overlapping each stroke. Apply heavy enough to produce an even, wet appearance. To improve adhesion, apply Plasti Dip Primer on metal surfaces before applying Plasti Dip. Plasti Dip High Gloss Top Coat adds Fadebuster™ protection and a lustrous finish over any Plasti Dip color. Plasti Dip Glossifier adds Fadebuster™ protection and a glossy, polished shine over any Plasti Dip color. All surfaces to be coated must be free of oils, grease, dirt, wax, and loose rust.

Also, allow each coat to fully dry before applying more product. Mix thoroughly before each use and refill. Apply additional coats as needed. Use naphtha, xylene or toluene for cleanup.

What is Plasti Dip?

Use naphtha, xylene , or toluene for cleanup. To greatly increase non-skid properties, sprinkle a generous amount of grit onto wet surface of first coat. Apply at least two additional coats of Plasti Dip.

Plasti Dip Spray Clear may cause some dulling of finish when removed from calendered vinyl . If thinning is desired, product thickens, or for cleanup, use naptha, xylene , or toluene solvents. Keep container tightly closed when not in use. Plasti Dip Blaze is a unique collection of neon Plasti Dip colors that deliver eye-catching looks for any application.

Is Plasti Dip safe to use on children's toys, animal containment, and/or on kitchen utensils?

Plasti Dip Satinizer adds Fadebuster™ protection to your Plasti Dip color while maintaining the satin luster of Plasti Dip color. Plasti Dip Pearlizer Enhancer will add a one-of-a-kind luster to any dried, cured Plasti Dip coating. It gives a pearlescent sheen and gleamy luster to any Plasti Dip color. Plasti Dip Metalizer Enhancer is a shimmering, metallic finish while letting the color of the Plasti Dip underneath show through. Shake can vigorously for one full minute after mixing ball begins to rattle. Avoid direct sunlight, high humidity, or breezy conditions.

Apply as many coats as desired. For best results, avoid direct sunlight, high humidity or breezy conditions. Plasti Dip Luxury Metal is a collection of nine luxurious, metallic colors styled after luxury vehicles. Each luscious color is infused with metallic specks, creating a cool, classy sparkle on anything you dip. Take your car from drab to fab and soak up the life of luxury.

Can I add colorant to the Plasti Dip and make a custom color?

Explore creative uses for Plasti Dip and share photos of your own automotive, handyman and crafty projects. We offer a full range of products for home DIY and craft projects. Satinizer and Glossifier™ are especially recommended for use with the Plasti Dip Blaze product line to keep the color’s vibrancy. Plasti Dip Classic Muscle is a collection of 13 classic muscle car colors, all a throwback to when muscle cars ruled the streets. Now you can rule the streets too with these bold and bright colors.

Seller cannot control use of this product and will not accept liability for more than product replacement. Most items being dip coated do not require priming because the coating is shrinking around the item as it dries. However, in extreme conditions or when adding protective coating to a large metal surface, primer is recommended. Use Plasti Dip Primer or a high quality acrylic auto body-type primer. Do not use Rust-Oleum® primer as it is not compatible.